Three parts that are normally bought separately — and normally forgotten separately, too. This bundle solves the whole job in one checkout.

Swivel, tilt, and pull the TV toward you — then push it flat when you're done.

• Fits 32–70" TVs up to 99 lbs — covers the vast majority of living-room and bedroom TVs.
• Max VESA 400×400mm — matches the mounting-hole pattern on most mid-to-large flat screens.
• 6 articulating arms — robot-welded steel construction for a rigid, non-flexing hold.
• Swivel left or right — angle the screen to your couch, kitchen island, or corner seating.

Extension and tilt working together for a genuinely adjustable viewing angle.

• Extends to 17.5" — pull the TV well off the wall for a closer view.
• Retracts to 3.4" — push it back flat against the wall when not in use.
• Tilts up 5° / down 15° — angle downward to cut glare from windows and overhead lights.
• ±3° post-install leveling — fine-tune the TV level after it's already on the wall.

The cable that actually keeps up with a modern TV, console, or streaming box — not a cable that quietly caps your picture.

• 48Gbps bandwidth — HDMI 2.1 certified, well beyond the 18Gbps ceiling of standard HDMI 2.0 cables.
• Supports 4K@120Hz and 8K@60Hz — handles the highest resolutions and refresh rates current TVs and consoles output.
• Dolby Vision HDR — passes the full HDR signal for accurate color, contrast, and brightness.
• Double-layer shielding — protects signal integrity and the cable itself from everyday wear.

6.6ft is the right length for most wall-mount setups, and it's rated for the devices people are actually plugging in.

• 6.6ft / 2M length — reaches comfortably from a wall-mounted TV down to a console or streaming box.
• PS5 & Xbox Series X ready — delivers the full bandwidth modern consoles need for high-res, high-refresh gaming.
• Works with Apple TV 4K & streaming devices — passes 4K HDR content without compression artifacts.
• Motion-blur reduction — high refresh-rate support keeps fast motion clean and sharp.

290" of channel — enough to route a wall-mounted TV's cables from the mount down to an outlet or media console, out of sight.

• 290" total length — 20 pieces at 14.6" each, enough to plan a full vertical or horizontal run.
• Self-adhesive install — peel and stick to the wall, no drilling required for the channel itself.
• Paintable white PVC — paint it to match your wall color so it disappears completely.
• Snap-on cover — tuck cables inside and close the channel for a clean, finished line.

Pre-cut lengths mean less measuring and cutting, more sticking and done.

• 20× 14.6" sections — combine pieces to reach from the mount to your outlet or console.
• Corner & connector pieces included — route around corners without an awkward gap.
• Trim to fit — cut individual sections shorter for tight runs or odd wall layouts.
• Works with any cable — power cords, HDMI, Ethernet, or speaker wire all fit inside the channel.

Everything to go from bare wall to a finished, wired TV setup in one order.

• Mounting Dream full motion TV mount — bracket, drilling template, hardware in pre-labeled bags, Allen key.
• Belkin HDMI 2.1 cable, 6.6ft — one certified 48Gbps cable ready to connect your source device.
• YesBes 290" cable raceway kit — 20 channel pieces, connectors, and adhesive backing.
• Everything needed for a clean install — no separate trips or add-on purchases required.

The result: a wall-mounted TV that looks like it was professionally installed.